Product Information

Professional Grade Outdoor Gigabit PoE Extender

828W 3-port IP67 Rated Weatherproof Gigabit PoE Extender is a standalone unit that drives incremental Gigabit Ethernet up to 240m or 800ft and can be deployed in series up to 4 units to reach 2,000ft (600m) at blazing fast full wire speed.

This standalone unit is to be powered and used with your Gigabit PoE injector or midspan source, or can be connected to a 828WP kit in a series. At time of ordering the 828W can be configured to disable PoE output on either or both output ports to enable non PoE LAN devices. Default configuration is PoE output enabled on both ports.

The 828W Outdoor IP67 Rated Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE+ cameras remotely using only a CAT5e or CAT6 rated 100m cabling. The unit can be configured at time of ordering for disabling PoE output on either or both output ports to enable standard non PoE LAN devices. By default both output ports supply PoE power. Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.

• Extends Full Duplex Gigabit Ethernet and PoE SIX TIMES beyond the IEEE barrier of 328ft (100m) with PoE+ 56V over CAT5e/6 or better wiring.
• Three LAN port design allows for deployment of (2) separate PoE devices up to 800ft (240m) or up to 2,000ft (600m) if used in a series.
• Rapid LAN style installation RJ-45 LAN Interfaces - no programming required.
• Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.
• Cisco / Motorola reverse polarity PoE compatible
• Ideal for deploying High Definition IP Cameras requiring Gigabit throughput at distance.
• Supports VoIP (Voice over IP).
• Network equipment independence - Transparent to protocols, applications and MAC addresses.
• Sustained full-duplex Gigabit Ethernet service delivery end to end.
• You must supply the PoE to power the 828W Outdoor IP67 Rated standalone unit or you can order the 828WP Outdoor Gigabit PoE Extender.

This kit includes the following:

---

(1) Enable-IT 828W Outdoor IP67 Rated Gigabit PoE Ethernet Extender Unit

(1) 10' Black Ethernet patch cords

(1) Enable-IT 828W Quickstart Guide

Power
828W Gigabit PoE Extender - PoE Powered by your own PoE power source

Data Rate
Gigabit full-duplex Ethernet Data with your PoE power source

Interface
Ethernet: (3) LAN RJ-45 Standard 10/100/1000 Base-TX ports
Dimensions
Height 1.4" (35mm) Depth 3.4" (86mm) Width 4.4" (111mm)

Environment
Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing

Enclosure
Ruggedized IP67 Rated mountable casing for durability.

Application Diagram :

Single Unit ( will open in new window )

2 Units ( will open in new window )