Product Information

This kit includes the following:

---

(1) Rackmount 8935 with (2) RJ-21 telco port and RJ-21 cables.

(1) 66 Telco punchdown block w/ RJ-21 connectors

(2) 100MB uplink ports-

(1) DB9 serial Console port

• (24) individual extended Ethernet lines in a single 8935 rackmount controller.
• Delivers 25Mbps down 3Mbps Up over standard telephone wiring or better up to 24,000ft or 7.31km.
• RJ-21 Telco connection for insertion into existing telephone system.
• Maintains lifeline POTS service (one analog or digital phone line).
• Rapid Telco style installation - no programming required.
• Supports IP routing, DHCP addressing, NAT-Network Address Translation.
• Supports VoD (Video on Demand) and MPEG IP channels.
• Supports VoIP (Voice over IP).
• Network Equipment independence - Transparent to protocols, applications and MAC addresses.
• Supports Multicast : IGMP snooping.

• Management
  - Telnet
  - MAC address number limit
  - DHCP client Function
  - Provide Console port (RS-232C)
  - SNMP v1, MIB II
• Ethernet multicast / broadcast storm packet control and Flow control
• Security
  - login account mgmt
  - Connection timeout
  - Remote IP access limit
• 10/100 Mbps full-duplex service delivery to 830 CPE

Compatibility
ITU G.ADSL Plus, Annex A, Annex M, G.Span, G.922.3, G.992.1, G.DTM, G.922.2 G.Lite, ANSI T1.413.

Data Rate
100Mbps full-duplex at 830 CPE to LAN, w/ Data & Voice transmission.

Throughput
25Mbps down / 3Mbps up.

Capacity
830 LRE ports : 24 x LRE Ports (RJ-21 telco port) UPLINK: 2 x 100 Base-TX Ethernet port.

Interface
Ethernet: RJ-45 Standard 10/100 Base-TX
Voice/Data Line: RJ-21.

Power Consumption
AC Input: (90~254V) @50/60Hz(, Power: 50W(Max).

Dimensions
Height 1.8" (45mm)
Depth Rackmount 1U 19" (482.6 mm)
Width 15.3" (390mm)

LED Display
Subscriber Link : Display ADSL line sync
LINK/ACT : 10/100-Base-TX status / Data TX/ RX
10/100M : 10/100 Base-TX Speed(10M/100M)
HALF/FULL : 10/100 Base-TX Transmission Mode
PWR : System power supply
ALM : System CPU error.

Environment
Operational Temperature : 0 C ~ 50 C
Humidity : 10%~90%, non-condensing.

Application Diagram

8935 DSLAM with 830CPE (will open in new window)